Specification :
Stainless steel: 1Cr18Mn8Ni5N/ SUS 202
Standard: GB / T 1220-1992
à Features and Scope:
Nickel-steel, instead of grades 1Cr18Ni9.
à Chemical Composition:
Carbon C: d 0.15
Si Si: d 1.00
Manganese Mn: 7.50 ~ 10.00
S S: d 0.030
P P: d 0.060
Chromium Cr: 17.00 ~ 19.00
Ni-Ni: 4.00 ~ 6.00
N N: d 0.25
à Mechanical Properties:
Tensile strength à b ( MPa) : e 520
Conditions yield strength à 0.2 ( MPa) : e 275
Elongation ´ 5 ( % ) : e 40
Reduction of area à ( % ) : e 45
Hardness: d 207HB; d 95HRB; d 218HV
à Heat treatment and microstructure specifications:
Heat Specifications: 1010 ~ 1120 solution fast cold.
Microstructure: Organizing for the austenitic type.
Stainless steel: 0Cr18Ni9/ SUS 304
Standard: GB / T 1220-1992
à Features and Scope:
As the most widely used stainless steel, heat-resistant steel, food equipment, general chemical equipment, atomic energy using industrial equipment.
à Chemical Composition:
Carbon C: d 0.07
Si Si: d 1.00
Manganese Mn: d 2.00
S S: d 0.030
P P: d 0.035
Chromium Cr: 17.00 ~ 19.00
Ni-Ni: 8.00 ~ 11.00
à Mechanical Properties:
Tensile strength à b ( MPa) : e 520
Conditions yield strength à 0.2 ( MPa) : e 205
Elongation ´ 5 ( % ) : e 40
Reduction of area à ( % ) : e 60
Hardness: d 187HB; d 90HRB; d 200HV
à Heat treatment and microstructure specifications:
Heat Specifications: 1010 ~ 1150 solution fast cold.
Microstructure: Organizing for the austenitic type..Stainless steel:
0Cr17Ni12Mo2/ SUS 316
Standard: GB / T 1220-1992
à Features and Scope:
In seawater and various other media, better corrosion resistance than 0Cr19Ni9. Pitting mainly used for materials.
à Chemical Composition:
Carbon C: d 0.08
Si Si: d 1.00
Manganese Mn: d 2.00
S S: d 0.030
P P: d 0.035
Chromium Cr: 16.00 ~ 18.50
Ni-Ni: 10.00 ~ 14.00
Mo Mo: 2.00 ~ 3.00
à Mechanical Properties:
Tensile strength à b ( MPa) : e 520
Conditions yield strength à 0.2 ( MPa) : e 205
Elongation ´ 5 ( % ) : e 40
Reduction of area à ( % ) : e 60
Hardness: d 187HB; d 90HRB; d 200HV
à Heat treatment and microstructure specifications:
Heat Specifications: 1010 ~ 1150 solution fast cold.
Microstructure: Organizing for the austenitic type.
.Stainless steel : 17-4PH ( sus630)
à Features and Scope:
Adding copper species precipitation hardening steel. For the manufacture of shafts, turbine components.
à Chemical Composition:
Carbon C: d 0.07
Si Si: d 1.00
Manganese Mn: d 1.00
S S: d 0.030
P P: d 0.035
Chromium Cr: 15.50 ~ 17.50
Ni-Ni: 3.00 ~ 5.00
Copper Cu: 3.00 ~ 5.00
Niobium Nb: 0.15 ~ 0.45
à Mechanical Properties:
Tensile strength à b ( MPa) : 480 aging, e 1310; 550 aging, e 1060; 580 aging, e 1000; 620 aging, e 930
Conditions yield strength à 0.2 ( MPa) : 480 aging, e 1180; 550 aging, e 1000; 580 aging, e 865; 620 aging, e 725
Elongation ´ 5 ( % ) : 480 aging, e 10; 550 aging, e 12; 580 aging, e 13; 620 aging, e 16
Reduction of area à ( % ) : 480 aging, e 40; 550 aging, e 45; 580 aging, e 45; 620 aging, e 50
Hardness: solid solution, d 363HB and d 38HRC; 480 aging, e 375HB and e 40HRC; 550 aging, e 331HB and e 35HRC; 580 aging, e 302HB and e 31HRC; 620 aging, e 277HB and e 28HRC
à Heat treatment and microstructure specifications:
Heat treatment specifications: 1) solid solution 1020 ~ 1060 fast-cooling; 2) 480 aging, after solution treatment, 470 ~ 490 air-cooled; 3) 550 aging, after solution treatment, 540 ~ 560 air-cooled; 4) 580 aging, after solution treatment, 570 ~ 590 air-cooled; 5) 620 aging, after solution treatment, 610 ~ 630 air cooling.
Microstructure: Organizing for the precipitation hardening.
Monel 400, K-500
Monel 400 is a large amount, versatile, good performance, high corrosion resistance of nickel-copper alloy. Chemical composition is mainly Cu30% Ni65% and about, plus a small amount of Fe ( 1-2% ) of the composition, also known as MCu-28-1.5-1.8. Organizational structure for the single phase austenite.
The corrosion resistance of Monel capacity generally superior than the nickel and copper, pure nickel is more resistant than reducing the corrosion medium, medium oxidation resistance than the copper corrosion of the sulfuric acid, phosphoric acid, carbon corrosion resistance is very good, in particular, hydrochloric acid corrosion resistance of hot concentrated alkali also have excellent corrosion resistance.
Stainless Steel Bars and Plates AISI SUS 301, 303, 304, 316, 316L, 310, 410, 420, 430, 17-4PH.