The compact base unit NC-scriber CS 55 top provides perfect looking lettering and symbols complying with the standards for technical letterings. With your growing needs you can upgrade to the NC-scriber CS 110 and to the NC-scriber CS 110 plus. In addition, the NC-scriber CS 55 top can be ordered with embedded architecture or surveying symbols.
Lettering complying with the standards with text height of 1 to 30mm in 0.1mm steps and selectable writing angles • Multi-line text left-aligned, right – aligned or centred, justified text or text arround a circle • Typeface variations • Tables • Dimensioning and framing • Circles and symbols • Permanent memory with 99 addresses • Reverse positioning of max. 40 characters, tabulator with 40 startpoints • Constant pitch for tables • Mirror image writing, variable spacing, variable expansion and condensing of lettering • Direction of writing selectable in 90 degree steps, letter slant in 1 degree steps wilthin + / - 45 degrees • Text along arcs • Pen speeds selectable in steps between 0.5 to 12 cm per seconds.
Specifications: Dimensions: 378 x 168 x 48 mm. Weight: 1.35 kg. Pen range: x-axis, 190mm; y-axis, 45mm. Resolution: 0.01mm. Pen speed: 0.5, 1.2, 2.0, 3.0, 4.0, 7.5, 10.0, 12.0 cm/ sec. Display: 36 characters plus cursor and status. Power consumption: 40w. In general, the NC-Scriber CS 55 Top, the NC-Scriber CS 55 Top architecture and the NC-Scriber CS 55 Top surveying can be upgraded with the key module to the features of the NC-Scriber CS 110. Further on with the next upgrade module, the features of the NC-Scriber CS 110 Plus can be adchieved |