MEGGER MIT 1020/ 2 Insulation Resistance Tester - 10-kV
Specification
This Megger MIT1020/ 2 insulation resistance tester affords the highest level of quality testing along with prime safety, convenience and portability. The tester measures to 35 Tera-ohms, thereby making them fully suitable for critical installation tests and establishment of reliable base data for new high-capital equipment. The MIT520/ 2 increases the functionality by permitting test voltage to be set in any 10 V increment from 50 V to 1 kV, then in 25 V steps all the way to 5 kV. The universal testing standard for rotational equipment, IEEE 43-2000, increased the test voltage recommendation to 10 kV for equipment rated 12 kV and above. Full compliance with this standard can be attained with the MIT1020/ 2. This model offers all the capabilities already mentioned, plus an increased test voltage to 10 kV. As with the MIT520/ 2, test voltage can be set in 25 V increments, but now all the way to 10 kV. Measurement range has been expanded commensurately with the highest rated equipment, to 35 T© .
Features:
Line supply or battery operated
Digital/ analog backlit display
Measurement range to 35 T©
Automatic insulation resistance tests
Automatic dielectric absorption ratio, polarization index, step voltage, and dielectric discharge tests
RS232 or USB download of results
Ingress protection to IP65
3 mA short circuit current
Benefits:
CAT IV 600 V safety rating allows for safe use in the widest range of applications.
Improved operating flexility provides the user with the choice of using these instruments via line or battery operation. Line operation also affords enhanced charging capabilities for high-capacitance test samples.
High measurement range enables installation testing and long-term trending of higher value apparatus.
3 mA short circuit current allows for faster charging and testing of large capacitive and inductive loads.
Results storage and downloading enables state-of-the-art record keeping free of transposition errors.
Five industry-standard tests can be performed automatically, freeing operator from time-consuming manual operations.
Backlit display enables ease of testing in poorly lit areas.
Rugged, lightweight polypropylene case and IP65 rating make all of the instruments adaptable for all field conditions.
A variety of measurements including applied test voltage, leakage current and capacitance, affords enhanced capabilities to diagnose insulation condition and problems.
Redundant safety features includes automatic discharge of test item, test inhibition in presence of external voltage, and design to EN61010.
Includes: Test Lead Set, Power Cord, RS232 And USB Cable, Lead Storage Bag, Software, Instructions
Specifications:
Type: AC And Battery
Output Test Volts ( DC) : 50/ 250/ 500/ 1000/ 2500/ 5000/ 10, 000
Insulation Resistance Range ( Ohms) : 10K to 35T
Live Circuit Detection: 0 to 300VAC
Capacitance Range: 10 nF to 50 uF
Display: Digital/ Analog LCD
Accuracy: + / -5% to 1 Tohm, + / -10% to 35 Tohm
Auto Power Off: Yes
Safety Rating: CAT IV 600V
Leakage Current Range: + / -5mA
Data Logging: Yes
Auto Ranging: Yes
Interface: RS-232 and USB
Power Source: AC or Rechargeable Battery