Specification :

Type: 8.xx / CFC100 / CFC1000

The Compact Flame Controller unites flame scanner and flame amplifier module in one housing. Compact flame controllers series 8.xx are mainly used for the monitoring of gas and oil burners. Both relay switching state and flame intensity are displayed on the unit. Installation work becoming unnecessary, no spatial requirements for the evaluation electronics and the use of simple control lines are the essential advantages of these compact flame controllers.

Due to their wear free sensor technology, the compact flame controllers are almost maintenance free and enable long-lasting and reliable fuel burning operation.

Suitable for monitoring the following fuels:
  Light and heavy oils,
  Natural, blast furnace and coke oven gas
  Residue incineration
  Alkaline solutions, flue gases, residues

Examples of applications:
  Line burners ( with and without GT flue gas)
  Diffusion flames/ pre-mixed flames
  Refuse incineration plants / grate firing or rotary kilns
  Fluid-bed firing
  Cracking furnaces

Features:
  Fail-safe, self-monitoring
  Suitable for intermittent and continuous operation
  TÜ V tested
  ATEX approved
  DVGW, DIN-CERTCO, CSA and UL approved
  Approved acc. to EN 230 and EN 298
  Fully electronic design
  Direct output of analog signal 4- 20mA
  Integrated flame relay as floating two-way switch
  Visualization of flame intensity and relay contact switching state via LEDs
  Degree of protection IP65
  Flame monitoring in the spectral range from 250nm to 7000nm, depending on application and type
  All compact flame controllers have compatible connections
  Wide range of accessories, such as adjustment devices and heat insulators
  Fiber optics technology for high temperature applications
  All compact flame controllers are also available in EX-protected housings