MUFFLE FURNACE THERMOLYNE

BENCHTOP MUFFLE
Model Number: F1410M-33
Temp up to 1100' C

Product Description :

Two open coil heating elements on sides of chamber assure fast heat-up, with minimum temperature gradient.

Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient ceramic insulation.
The rear of the chamber incorporates a 0.38" ( 0.95 cm) diameter port for monitoring chamber temperatures with independent measuring devices.

All models shipped complete with power cord.
Power cord supplied with all models.

Operation
Built-in vent port removes undesirable contaminants and
moisture; extends the life span of the element and unit.
Four temperature controller models:
A1: Digital single set point control. A single display shows actual temperature or set point.
B1: Digital single set point control with a single ramp to set point and a dwell. A single display shows actual temperature or set point. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
C1: Digital programmable control with one stored program of 8 segments. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
D1: Digital programmable control with 4 stored programs, 16 segments per program. The controller also includes RS232 communications. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
* For Calibration Verification System, see Pyrometers.

Safety
Door safety switch protects operator by removing power to the heating elements upon opening the door.
Thermocouple break protection cuts power to the heating elements, prevents a thermocouple failure runaway condition.

Applications
Gravimetric analysis
Sintering
Quantitative analysis
Heat Treating

Amps 4.2
Chamber Cubic Inches L 120 ( 2.0)
Chamber Dimensions D 6 ( 15)
Chamber Dimensions H 4 ( 10)
Chamber Dimensions W 5 ( 13.7)
CUL false
Desc Benchtop Muffle Furnace
Hertz 50/ 60
NRTL false
Operating Temp Range C 100-1200
Operating Temp Range F 212-2192
Overall Dimensions D 15.5 ( 39)
Overall Dimensions H 18.5 ( 47)
Overall Dimensions W 11.3 ( 28.5)
Product Line Thermolyne
Shipping Weight LK 41 ( 18.5)
Stability at 1000 + / - 0.4C
Sub Product Group Id 97
Temp Control Group A1
Uniformity at 1000 4.8 C
Volts 240
Watts 1000